What happens if an airport control tower goes empty: a darkened airport tower and lit runway at dusk after the tower went ATC Zero
Home » Blog » What Happens If an Airport Control Tower Goes Empty?

What Happens If an Airport Control Tower Goes Empty?

On the night of November 18, 2026, Hollywood Burbank Airport’s tower went “ATC Zero.” Controllers were not on duty, and arriving crews had to change how they landed. So what happens if an airport control tower goes empty? Planes do not fly blind, but the usual voice in the headset is gone.

Short answer: If an airport control tower goes empty, the FAA can declare ATC Zero, hand the airspace to a nearby radar facility, slow arrivals and have pilots announce their position on a shared frequency. That is what happened at Burbank. Operations were back to normal by Thursday morning, according to the FAA.

The agency has not said how long the tower was unstaffed or how many flights were affected. Those details remain unconfirmed.

What happened when an airport control tower went empty at Burbank?

Local reporting, first picked up by CBS Los Angeles and KTLA, described several planes landing at Hollywood Burbank Airport (BUR) on Wednesday evening after the tower had no controllers on duty. Audio captured a controller telling aircraft that the airport was going ATC Zero.

On Thursday, the FAA cited staffing issues. “Following standard procedures, Southern California TRACON took over the tower’s airspace,” the agency said in a statement. “When staffing issues occur, the FAA ensures safety by slowing the rate of arrivals into an airport.” Operations had returned to normal as of Thursday morning, the FAA said.

Simple Flying, which contacted the FAA, later reported that the agency also said staffing problems affected the tower on Wednesday afternoon, not only in the evening. The FAA has not published a timeline of each lapse, and it has not officially confirmed unofficial suggestions that a single controller’s required rest breaks caused repeated gaps. Those claims remain unverified.

What does ATC Zero mean if an airport control tower goes empty?

ATC Zero is the FAA’s term for a facility that cannot provide air traffic control services. It does not mean the airport is automatically closed, and it does not mean there is no help at all.

In practice, a neighboring facility usually takes over part of the workload. At Burbank, that facility was Southern California Terminal Radar Approach Control, known as TRACON. Approach controllers already guide aircraft into and out of the region. When a tower goes empty, they can keep handling the wider airspace while pilots manage the last stage near the runway in a different way.

This is a different tool from a nationwide ground stop, which holds departures across the country. A ground stop is a traffic-management decision. ATC Zero is a staffing or service outage at a specific facility.

How do planes land if an airport control tower goes empty?

Pilots train for this. Many smaller airports have no control tower at all, or they close the tower at night. The FAA’s Aeronautical Information Manual describes the standard method: crews switch to a common traffic advisory frequency, or CTAF, and announce where they are and what they intend to do, so other aircraft can stay clear.

Reporting from Burbank described the same handoff. After the tower went ATC Zero, pilots were told to use the shared frequency for the final approach and for ground movements. Regional radar controllers still guided inbound flights toward the airport, then handed them off for that last segment. Planes continued to land, and no crash was reported.

That shared-frequency procedure reduces confusion, but it is not the same as a controller in the tower assigning a runway, spotting a vehicle on the pavement or issuing an immediate go-around. This is why the FAA says it slows the arrival rate when staffing fails. A quieter sequence gives crews more time to see and be seen.

Is it safe when an airport control tower goes empty?

The Burbank event ended without a reported accident. That does not make an empty tower routine or risk-free. Tower controllers exist to keep aircraft, vehicles and people on the airfield from ending up in the same place at the same time. When they are absent, more of that work falls on pilots and on the regional radar facility.

Close-quarters mistakes are already a known concern even with a staffed tower. Our guide to what happens if two planes collide on a taxiway covers how quickly a ground conflict can escalate, as the Miami UPS and Copa incident showed. That risk is exactly why people ask what happens if an airport control tower goes empty at a busy field.

Safety in an ATC Zero event therefore depends on procedure: a slower arrival stream, a clear frequency, and crews who announce every move. It also depends on weather and traffic volume. A quiet night at a midsize airport is a different problem from a busy hub in low visibility. The FAA has not said whether it did, in fact, slow arrivals into Burbank that night, only that this is the standard response.

Could this happen at a bigger airport?

Yes. An airport control tower goes empty when a facility loses staffing because of illness, scheduling gaps or other disruptions. The consequences grow with traffic. At a large hub, an empty tower would likely force much steeper arrival cuts, long holds and cancellations, because the FAA would still try to keep the remaining operation safe.

Burbank is a busy commercial airport, but it is not Los Angeles International. Southern California TRACON could absorb the airspace under published procedures, and flights continued. A similar outage at a major international airport would be harder to hide inside a normal evening schedule.

Travelers should also not confuse this with a security scare. If your flight gets a bomb threat, crews and security teams follow a different playbook, often including a diversion and a full search. An empty tower is an air-traffic problem, not a threat against the aircraft.

Frequently asked questions

Did planes land without any air traffic control at Burbank?

No. The tower was unstaffed, but Southern California TRACON took over the airspace, and pilots announced their positions on a shared frequency. The FAA said operations had returned to normal by Thursday morning.

What happens if an airport control tower goes empty during a busy period?

The FAA’s standard response is to slow the rate of arrivals. At a large, busy airport, that can mean delays and cancellations. The exact impact depends on traffic, weather and how quickly a neighboring facility can take over.

How long was the Burbank tower empty?

The FAA has not said. KTLA reported that the duration was unclear. Treat any specific number of minutes or hours as unconfirmed unless the agency publishes it.

Why did the airport control tower go empty?

The FAA cited staffing issues, which is how an airport control tower goes empty in this kind of event. It has not released a more detailed official explanation, such as how many controllers were scheduled or whether rest rules played a role.

Would the FAA close the airport if an airport control tower goes empty?

Not automatically. If an airport control tower goes empty, ATC Zero means the local tower cannot provide services. Flights can continue under backup procedures, often at a reduced rate, unless officials decide conditions are no longer safe.

Sources

Related Posts